Yamaha DTX700 Reference Manual - Page 40

UTILITY For pad-related settings UTILITY/PAD The parameters from the Menu area's Utility/Pad page can be used to assign functions to pads and footswitches. UTILITY/PAD 1/2 Control-Change Send Channel (CC Ch) Use this parameter to set a MIDI channel for sending the MIDI Control Change message selected using the PadFunc (Pad Function) parameter. Settings: 1 to 16 Control Change Value (CC Val) Use this parameter to set a value for the MIDI Control Change message selected using the PadFunc (Pad Function) parameter. Settings: 0 to 127 UTILITY/PAD 2/2 PAD Press this button to open a popup window for selecting the pad to be set. You can also strike a pad to select it. AUDITION By pressing the [F3] button (AUDITION), you can play the sound assigned to the selected pad without actually striking it. This can prove highly useful when you need to listen to the assigned sound while making settings. Pad Function (PadFunc) Use this parameter to specify a function (such as kit, song, or tempo selection) to be performed instead of playing a sound when the current pad is struck. Note that you can strike a pad or select it using the [F1] button (PAD) to make it the current pad. off inc kitNo dec kitNo inc songNo dec songNo inc tempo dec tempo tap tempo clickOn/Off effectOn/Off CC01 to CC95 Sounds will be produced in the normal way. The kit number will be increased by 1. The kit number will be decreased by 1. The song number will be increased by 1. The song number will be decreased by 1. The tempo will be increased by 1 bpm. The tempo will be decreased by 1 bpm. The pad or footswitch can be used to tap the tempo. The click track will be toggled on or off. The effects will be toggled on or off. A MIDI Control Change message of the corresponding number will be sent to the DTX700's internal tone generator and connected MIDI devices. Settings: off, inc kitNo, dec kitNo, inc songNo, dec songNo, inc tempo, dec tempo, tap tempo, clickOn/Off, effectOn/Off, CC01 to CC95 Foot Closed Position (FootClosePos) Use this parameter to adjust the position at which the hi-hat switches from open to closed when the hi-hat controller is operated. The lower the value, the smaller the virtual opening between the top and bottom hi-hats. Settings: -32 to +0 to +32 Splash Sensitivity (FootSplashSens) Use this parameter to set the degree of sensitivity for detecting hihat foot splashes. The higher the value, the easier it will be to produce a foot-splash sound with a hi-hat controller. High values may, however, result in splash sounds being unintentionally produced when, for example, you depress the hi-hat controller lightly as you keep time. It is a good idea to set this parameter to "off" if you do not want to play foot splashes. Settings: off, 1 to 127 HH-Kick Velocity Sensitivity (HH-KickVelSens) Use this parameter to set the sensitivity of the DTX700 to operation of the foot controller connected via the [!2 HH-KICK] trigger input jack. The larger the setting, the louder the sound produced when the controller is lightly depressed. Settings: 0 to 127 CymbalChokeRate Use this parameter to specify how quickly the cymbal sound is to decay when the choking or muting technique is used. The larger the value, the faster the sound will decay. Settings: -20 to +0 to +20 DTX700 Reference Manual 40