Yamaha DTX700 Reference Manual - Page 50
For trigger management tasks
View all Yamaha DTX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
TRIGGER For trigger management tasks TRIGGER/JOB TRIGGER/JOB/COPY PAD From the Copy Pad page, you can copy data from the current trigger setup on an individual pad basis. Use Pad1 and Pad2 to select the pads, and then press the [F3] button (EXECUTE) to copy the settings. TRIGGER/JOB/COPY TRIGGER From the Copy Trigger page, you can copy data into the current trigger setup. Use Bank and Number to select the trigger setup whose settings are to be copied, and then press the [F3] button (EXECUTE) to copy the data. Pad1 Use this parameter to set the pad whose settings are to be copied. You can also strike a pad to select it. Pad2 Use this parameter to set the pad whose settings are to be replaced. You can also strike a pad to select it. Settings: Snare, Tom1, Tom2, Tom3, Ride, Crash1, Crash2, HiHat, Kick, Pad10, Pad11 Bank Use this parameter to indicate the bank containing the trigger setup whose data is to be copied. "PRE" refers to the trigger setups stored as the DTX700's default settings, and "USER" refers to the trigger setups that can be accessed by pressing the [KIT] button followed by the [F2] button (TRIGGER) to open the Trigger Setup page. Settings: PRE, USER Number Use this parameter to specify the number of the trigger setup whose settings are to be copied. Settings: 01 to 09 when Bank is set to "PRE" 01 to 20 when Bank is set to "USER" DTX700 Reference Manual 50