Yamaha DTX700 Reference Manual - Page 18

KIT [Page displayed when a MIDI note number has been selected directly using the [F1] button (PAD)] NOTE • The VoiceCategory parameter cannot be set to "eSong" when a MIDI note number is selected directly. KIT/VOICE 2/6 The parameter used for tuning will depend on the type of voice assigned to the current pad. [Drum sounds or waves (i.e., imported audio files)] Volume Use this parameter to set the volume of the voice. Settings: 0 to 127 Voice Panorama (Pan) Use this parameter to set the stereo pan of the voice. Settings: L63 to C to R63 KIT/VOICE 3/6 The following parameters are used to adjust the tone of the voice. [When VoiceCategory is "Melody"] Tuning (Tune) Use this parameter to adjust the tuning of the assigned voice in one-cent steps (0.01 = 1 cent) Settings: -24.00 to +0.00 to +24.00 NOTE • A cent is a unit of pitch defined as one hundredth of a semi- tone. (100 cents = 1 semitone) Note Use this parameter to set the pitch of the assigned voice as a MIDI note number. Settings: C-2 to G8 Attack Time (Attack) Use this parameter to set the amount of time it takes from when the pad is struck until the assigned voice reaches its peak volume. Settings: -64 to +0 to +63 Decay Time (Decay) Use this parameter to set the amount of time it takes the voice to drop to a steady level after reaching its peak level. Settings: -64 to +0 to +63 Release Time (Release) Use this parameter to set the amount of time it takes for the voice to fade out after sending a MIDI Note Off message. Settings: -64 to +0 to +63 NOTE • MIDI Note Off messages are not sent for pads and layers for which the RcvKeyOff (Receive Key Off) parameter from the Menu area's Kit/MIDI/Assign page is set to "off". Therefore, the release-time setting has no effect in such a case. • With certain types of voices, modifying the tone parameters above will have very little effect. DTX700 Reference Manual 18