Yamaha DTX700 Reference Manual - Page 42
Utility/midi
View all Yamaha DTX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
UTILITY UTILITY/MIDI 2/3 Sequencer Control (SeqCtrl) Use this parameter to specify whether or not System Realtime messages (i.e., FA Start, FB Continue, and FC Stop) will be sent and received via MIDI. off in out in/out System Realtime messages are neither sent nor received. System Realtime messages are received but not sent. System Realtime messages are sent but not received. System Realtime messages are sent and received. Settings: off, in, out, in/out NOTE • If "start", "continue", or "stop" has been set for the MessageType parameter from the Menu area's Kit/MIDI/Assign page, the SeqCtrl (Sequencer Control) setting will have no effect and the corresponding message (i.e., FA Start, FB Continue, or FC Stop) will be output. MIDI Merge (Merge) The MIDI Merge function allows you to mix MIDI messages received via the [MIDI IN] connector with performance data produced by playing the DTX700, and to output this mixed MIDI data via the [MIDI OUT] connector. Set this parameter to "on" to enable the merging of MIDI messages in this way. Settings: off, on Channel 10 Receive (Rcv10ch) Use this parameter to enable ("on") or disable ("off") the receipt of MIDI messages sent by external devices on Channel 10. If set to "off", the internal tone generator will play voices on Channel 10 in response only to input from pads connected to the DTX700. Settings: off, on Program Change Receive (RcvPC) Use this parameter to enable ("on") or disable ("off") the receipt of MIDI Program Change messages. If set to "off", voices will be changed based only on drum-kit voice settings when a new kit is selected. If you want voices on all MIDI channels to change in line with song settings and in response to signals from external MIDI devices, this parameter should be set to "on". Settings: off, on Channel-10 Program Change Receive (RcvPC10ch) Use this parameter to enable ("on") or disable ("off") the receipt of MIDI Program Change messages sent on MIDI channel 10. If you want kits to change in line with song settings or in response to signals from external MIDI devices, this parameter should be set to "on". Note that this setting takes effect only when "on" is also selected for the RcvPC (Program Change Receive) parameter (on this page). Settings: off, on UTILITY/MIDI 3/3 Polyphonic Aftertouch (PolyAfter) Use this parameter to enable ("on") or disable ("off") the exchange of polyphonic aftertouch with external MIDI devices. Settings: off, on Send Hi-hat Controller (SendHH) Use this parameter to enable ("on") or disable ("off") the sending of MIDI messages corresponding to continuous motion of a hihat controller between the open and closed positions. Settings: off, on NOTE • If "hi-hat" is selected for the HH Func (Hi-hat Function) param- eter from the Menu area's Kit/Pad page, MIDI messages will be sent only when this parameter is set to "on". • If "MIDI" is selected for the HH Func (Hi-hat Function) parame- ter from the Menu area's Kit/Pad page, MIDI messages will always be sent, regardless of whether this parameter is set to "on" or "off". DTX700 Reference Manual 42