Yamaha DTX700 Reference Manual - Page 58

FILE 3. Select the file type. Move the cursor to the Type row, press the dial, and select the type of file you wish to save. All AllKit AllWave AllSong AllTrigger Utility All User data - i.e., all kits, waves, songs, and triggers in addition to utility data All kit data All wave data All song data All trigger data Utility data Settings: All, AllKit, AllWave, AllSong, AllTrigger, Utility NOTE • If you select "AllWave" despite wave data having not yet being created, a "No Wave Data" error message will be displayed and no data will be saved. 4. Enter a name for the file to be saved. Move the cursor to the Name row and press the dial to call up the file naming page.  Entering file names 4-1 Move the cursor within the name field using the [F1] and [F3] buttons and select a character for that position by turning the dial or pressing the [-/DEC] and [+/INC] buttons. A name of up to 8 characters in length can be assigned to files. The following characters can be used. NOTE • If you hold down the [SHIFT] button and press the [F1] or [F3] button, the cursor will move to the start or end of the file name field. • If you hold down the [SHIFT] button and press the [-/DEC] or [+/INC] button, or alternatively, hold down the [SHIFT] button and turn the dial, the cursor will jump between the " ", "0", "A", and "~" characters. 4-2 When you have entered the required name, press the dial or the [EXIT] button to return to the previous page. NOTE • Any space characters included in file names will be automatically replaced with "_" (i.e., an underscore). 5. Press the [F3] button (EXECUTE). You will be asked to confirm that the file is to be saved. Press the dial to proceed. Alternatively, you can press the [EXIT] button to return to Step 2 above without saving. If a file of the same name already exists, you will be asked to confirm whether it is to be overwritten as shown below. If you wish to set a different file name to avoid overwriting, press the [EXIT] button to return to the page from Step 2 above. 6. Press the dial to save the file. The following message will be displayed as the data is being saved. If you press the [EXIT] button at this time, the save process will be aborted and you will be returned to the page from Step 2 above. CAUTION • Do not unplug the USB memory device from the [USB TO DEVICE] port or turn off either the memory device or the DTX700 while data is being saved. Failure to observe this precaution can lead to the memory device or the DTX700 being permanently damaged. When the data has been saved, you will be returned to the page from Step 2 above. DTX700 Reference Manual 58