Yamaha DTX700 Reference Manual - Page 34

SONG 3. When you have entered the required name, press the dial or the [EXIT] button to return to the previous page. 4. Press the [STORE] button and the dial to store your new setting. For MIDI-related settings SONG/MIDI 1/3 SONG/MIDI q Panorama (Pan) Use this parameter to set the stereo panning (Control Change 10) sent by the current song on the selected MIDI channel. In terms of the internal tone generator, this value affects all voices on that channel. Settings: L64 to C to R63 NOTE • If "off" or "PC" has been selected for the Transmit parameter above, this setting will be displayed as "---" and modification will not be possible. SONG/MIDI 2/3 q : The current MIDI channel number is reduced by 1. : The current MIDI channel number is increased by 1. q MIDI Channel (Ch) Use this parameter to select the current MIDI channel number (1 to 16). Settings: 1 to 16 Transmit Use this parameter to specify which MIDI messages the current song will send to the internal tone generator and external MIDI devices on the selected MIDI channel. off No MIDI messages will be sent. all All MIDI messages set here will be sent. PC Only Program Change messages, including Bank Select MSB and LSB messages, will be sent. Settings: off, all, PC Volume Use this parameter to set the MIDI volume (Control Change 7) sent by the current song. In terms of the internal tone generator, this value affects all voices played on the MIDI channel indicated by q. Settings: 0 to 127 NOTE • If "off" or "PC" has been selected for the Transmit parameter above, this setting will be displayed as "---" and modification will not be possible. • If you change the volume setting for MIDI channel 10, the cur- rent kit's Volume parameter setting from the Menu area's Kit/ Common page will also change to this new value. q MIDI Channel (Ch) Use this parameter to select the current MIDI channel number. Settings: 1 to 16 Bank Select MSB (MSB) Use this parameter to set a Bank Select MSB value sent by the current song on the selected MIDI channel. Settings: 000 to 127 Bank Select LSB (LSB) Use this parameter to set a Bank Select LSB value sent by the current song on the selected MIDI channel. Settings: 000 to 127 Program Change (PC) Use this parameter to set a Program Change number sent by the current song on the selected MIDI channel. Settings: 000 to 128 NOTE • If "off" has been selected for the Transmit parameter above, this setting will be displayed as "---" and modification will not be possible. To select a DTX700 drum kit, set parameters for MIDI channel 10 as follows. Setting a Program Change number for this MIDI channel ensures that the kit will change immediately whenever the song is played. MSB = 125, LSB = 001, PC = Number of desired kit DTX700 Reference Manual 34