Yamaha DTX700 Reference Manual - Page 32

KIT KIT/JOB/EXCHANGE PAD From the Exchange Pad page, you can swap the settings of a pair of pads. Use Pad1 and Pad2 to select the pads, and then press the [F3] button (EXECUTE) to exchange their settings. KIT/JOB/CLEAR PAD From the Clear Pad page, you can initialize individual pads from the current drum kit (i.e., restore their default settings). Use the Pad parameter to select the pad whose settings are to be initialized, and then press the [F3] button (EXECUTE). Pad1, Pad2 Use these parameters to select the two pads whose settings are to be swapped. Settings: SnareHd, SnareOp, SnareCl, SnrHdOff, SnrOpOff, SnrClOff, Tom1Hd, Tom1Rm1, Tom1Rm2, Tom2Hd, Tom2Rm1, Tom2Rm2, Tom3Hd, Tom3Rm1, Tom3Rm2, RideBw, RideEg, RideCp, Crash1Bw, Crash1Eg, Crash1Cp, Crash2Bw, Crash2Eg, Crash2Cp, HHBwOp, HHEgOp, HHBwCl, HHEgCl, HHFtCl, HHSplsh, Kick, Pad10, Pad11Hd, Pad11Rm1, Pad11Rm2, HHKick KIT/JOB/EXCHANGE KIT On this page, you can select two kits whose settings are to be swapped (i.e., Kit1 and Kit2). You then press the [F3] button (EXECUTE) to exchange their settings. Pad Use this parameter to select the pad whose settings are to be initialized. Settings: SnareHd, SnareOp, SnareCl, SnrHdOff, SnrOpOff, SnrClOff, Tom1Hd, Tom1Rm1, Tom1Rm2, Tom2Hd, Tom2Rm1, Tom2Rm2, Tom3Hd, Tom3Rm1, Tom3Rm2, RideBw, RideEg, RideCp, Crash1Bw, Crash1Eg, Crash1Cp, Crash2Bw, Crash2Eg, Crash2Cp, HHBwOp, HHEgOp, HHBwCl, HHEgCl, HHFtCl, HHSplsh, Kick, Pad10, Pad11Hd, Pad11Rm1, Pad11Rm2, HHKick KIT/JOB/CLEAR KIT From the Clear Kit page, you can initialize the current drum kit. Simply press the [F3] button (EXECUTE) to do so. Kit1, Kit2 Use these parameters to select the two kits whose settings are to be swapped. Settings: 01 to 60 DTX700 Reference Manual 32