Yamaha DTX700 Reference Manual - Page 25
Control Change Number CC No
View all Yamaha DTX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
KIT KIT/MIDI/OTHER 3/4 KIT/MIDI/OTHER 4/4 Using the following parameters, you can adjust the q send level to be set for each of the effect units when the current kit is selected. q q MIDI Channel (Ch) Use this parameter to select the current MIDI channel number. Settings: 1 to 16 Variation Send Level (VarSend(Dry)) Use this parameter to set the variation-effect send level to be sent whenever the current kit is selected. Settings: 0 to 127 NOTE • If the above MIDI channel (Ch) is set to 10, this setting will be displayed as "---" and modification will not be possible. Chorus Send Level (ChoSend) Use this parameter to set the chorus send level to be sent whenever the current kit is selected. Settings: 0 to 127 Reverb Send Level (RevSend) Use this parameter to set the reverb send level to be sent whenever the current kit is selected. Settings: 0 to 127 q MIDI Channel (Ch) Use this parameter to select the current MIDI channel number. Settings: 1 to 16 Control Change Number (CC No) Use this parameter to set the type of MIDI Control Change message to be sent whenever the current kit is selected. No Control Change messages are sent when "off" is set. Settings: off, 1 to 95 Control Change Valve (CC Val) Use this parameter to set a value for the MIDI Control Change message sent whenever the current kit is selected. Settings: 0 to 127 NOTE • If the Transmit parameter (also from the Menu area's Kit/MIDI/ Other page) has been set to "off" or "PC", this setting will be displayed as "---" and modification will not be possible. • If the type of MIDI Control Change message set here matches one of the following Control Change message types (also set on the Menu area's Kit/MIDI/Other page), this parameter's setting will have priority. Volume, Pan, VarSend(Dry), ChoSend, and RevSend DTX700 Reference Manual 25