Yamaha DTX700 Reference Manual - Page 55

WAVE For wave management tasks WAVE/JOB WAVE/JOB From the Job page, you can create waves by importing WAV or AIFF files from a USB memory device into the DTX700's internal memory and delete previously imported waves among other tasks. WAVE/JOB/IMPORT ALL Using the Import All page, you can import all WAV and AIFF files from a USB memory device's root directory into the DTX700's internal memory. Whenever you press the [F3] button (EXECUTE) on any of the pages accessed via the Wave/Job page, a confirmation panel will be displayed. If you decide to proceed with the corresponding operation, the content of the DTX700's internal memory will be permanently affected. WAVE/JOB/NORMALIZE From the Normalize page, you can increase the volume of the currently selected wave. WAVE/JOB/IMPORT Using the Import page, you can import a WAV or AIFF file from a USB memory device's root directory into the DTX700's internal memory. Ratio Use this parameter to specify how much the wave's volume is to be increased. Generally, a ratio of 100% or lower is used. With a setting of 100%, the volume will be increased to the maximum possible level without clipping. (Ratios greater than 100% can be specified; however, the wave may become distorted as a result.) Settings: 1 to 800 Wave Use this parameter to select a wave file from the USB memory device to be imported into the DTX700. PadAssign Use this parameter to assign the selected wave to a trigger input source once imported. If "off" is selected, no assignment will be made. Settings: off, SnareHd, SnareOp, SnareCl, SnrHdOff, SnrOpOff, SnrClOff, Tom1Hd, Tom1Rm1, Tom1Rm2, Tom2Hd, Tom2Rm1, Tom2Rm2, Tom3Hd, Tom3Rm1, Tom3Rm2, RideBw, RideEg, RideCp, Crash1Bw, Crash1Eg, Crash1Cp, Crash2Bw, Crash2Eg, Crash2Cp, HHBwOp, HHEgOp, HHBwCl, HHEgCl, HHFtCl, HHSplsh, Kick, Pad10, Pad11Hd, Pad11Rm1, Pad11Rm2, HHKick WAVE/JOB/DELETE From the Delete page, you can delete the wave currently selected on the Wave/Job page. DTX700 Reference Manual 55