Yamaha PM5D Owner's Manual - Page 184

MIDI REMOTE function ❏ Initiating communication between the PM5D and the DME series unit To select the port used for audio signal transmission/reception between the PM5D and the DME series unit, and to initiate communication, proceed as follows. 1 Connect the PM5D and the DME series unit. 2 In the DISPLAY ACCESS section, press the [MIDI/REMOTE] key several times to access the DME CONTROL screen. 3 In the component selection area at the upper left of the screen, select SETUP. A screen like the following will appear. 1 2 5 34 6 The SETUP screen contains the following items. A CONNECT This button initiates or terminates the connection between the PM5D and the DME series unit. B MIDI PGM CHANGE (MIDI program change) If this button is on, a program change message will be transmitted to the DME via the I/O card (MY16-C) or via the CASCADE IN/OUT connectors when a scene is recalled on the PM5D. This allows scenes to be recalled on the DME in tandem with scene recall operations on the PM5D. C INPUT PORT Here you can select the PM5D port that will receive audio signals from the DME. D MONITOR PORT Here you can select the PM5D port that will receive monitor signals from the DME. Since this monitor signal is sent to the PM5D's CUE bus, the DME's monitor function can be controlled from the PM5D just like the PM5D's own cue function (EXTERNAL CUE function). E MIXER SETUP (show the MIXER SETUP screen) This button displays the SYS/W.CLOCK function MIXER SETUP screen. F OUTPUT PORT Here you can select the PM5D port that will output audio signals to the DME. 4 In the INPUT PORT area located at the lower left of the screen, select the PM5D port that will receive audio signals from the DME series unit. The types of port that can be selected here will depend on the port that is currently selected for cascade input (MIXER SETUP screen CASCADE IN PORT SELECT field), as follows. Setting in the CASCADE IN PORT SELECT field (MIXER SETUP screen) CASCADE IN SLOT4 SLOT3/4 SLOT1-4 [CH1-8] SLOT1-4 [CH9-16] Items available in the INPUT PORT field ----, SLOT1-SLOT4 ----, CASCADE IN, SLOT1-SLOT3 ----, CASCADE IN, SLOT1-SLOT2 ----, CASCADE IN ----, CASCADE IN Note You cannot switch the cascade input port setting from the DME CONTROL screen. If necessary, click the MIXER SETUP button to access the MIXER SETUP screen (SYS/ W.CLOCK function), and change the port you will use for cascade input. 5 In the MONITOR PORT field, select the PM5D port that will receive monitor signals from the DME series unit. The following ports can be selected. No assignment SLOT1-1-SLOT4-16 . . .The desired port of slot 1-4 CASCADE 1-32 CASCADE IN ports 1-32 6 In the OUTPUT PORT field located in the lower right of the screen, select the PM5D port that will transmit audio signals to the DME. The types of port that can be selected here will depend on the port that is currently selected for cascade output (MIXER SETUP screen CASCADE OUT PORT SELECT field), as follows. Setting in the CASCADE OUT PORT SELECT field (MIXER SETUP screen) CASCADE OUT SLOT3/4 SLOT1-4 [CH1-8] SLOT1-4 [CH9-16] Items available in the OUTPUT PORT field ----, SLOT1-SLOT4 ----, SLOT1-SLOT4, CASCADE OUT Note You cannot switch the cascade output port setting from the DME CONTROL screen. If necessary, click the MIXER SETUP button to access the MIXER SETUP screen (SYS/ W.CLOCK function), and change the port you will use for cascade output. 184 PM5D/PM5D-RH Owner's Manual Reference section