Yamaha PM5D Owner's Manual - Page 79
Scene memory, About scenes
View all Yamaha PM5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
10 Scene memory This chapter explains how to store and recall the PM5D's mix parameters as "scenes." About scenes The PM5D can store and recall the current state of its mix parameters as a "scene." Scenes are assigned a scene number of 000-500. Scene 000 is read-only, and cannot be overwritten. Other scene numbers may be rewritten freely. A scene contains the settings of the panel controls (except for the TALKBACK section, CUE/MONITOR section, and the AD IN section of the PM5D model) as well as the settings of the functions and screens listed below. • INPUT function settings • OUTPUT function settings • EFFECT PARAM screen settings • GEQ PARAM screen settings • SELECTIVE RECALL screen (SCENE function) settings • FADE TIME screen (SCENE function) settings • MIXER SETUP screen (SYS/W.CLOCK function) settings • HA screen (SYS/W.CLOCK function) settings However, input patch, output patch, and HA (head amp) settings are saved in the corresponding library, and the scene contains only a library number that links to these saved settings. For example if the input patch, output patch, and HA (head amp) settings have been edited when you store a scene, the changes will be stored in the corresponding library, and the library number of these stored library items will be stored in the scene. • Storing a scene Input patch library Current scene 00 Initial Data Input patch settings Output patch settings Internal/external head amp settings 10 InPatch #1 Output patch library 00 Initial Data 10 OutPatch #1 000 Initial Data 010 Music #1 HA library 00 Initial Data Hint You can choose how the changes will be stored in the library; they can either be stored in a new unused library number, or overwritten onto the existing library number (➥ p.81). When you recall a scene, the input patch, output patch, and HA (head amp) library numbers linked to that scene will be recalled simultaneously. • Recalling a scene Input patch library Current scene 00 Initial Data Input patch settings Output patch settings Internal/external head amp settings 10 InPatch #1 Output patch library 00 Initial Data 10 OutPatch #1 000 Initial Data 010 Music #1 Scene memory HA library 00 Initial Data 10 HA #1 For each scene, you can specify whether to enable linking to these libraries (➥ p.159). For example if you turn off linking to the HA library for a certain scene, recalling that scene will not update the HA settings. Note By "head amp settings" we mean settings for the internal head amps of the PM5D-RH model and for an external head amp device that supports the special protocol (e.g., Yamaha AD8HR or AD824). The settings of the AD IN section of the PM5D model are not included. Scene memory 10 HA #1 Scene memory 10 PM5D/PM5D-RH Owner's Manual Operating section 79