Yamaha PM5D Owner's Manual - Page 280
MIX SEND VIEW screen, CH to MIX/MIX from CH, SEND LEVEL, PRE/POST Send level / Send, point
View all Yamaha PM5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 280 highlights
PAN/ROUTING function MIX SEND VIEW screen This screen lists the signals sent from the input channels to the MIX buses. You can also edit the settings from within this screen. MIX SEND VIEW 1 2 B SEND LEVEL, PRE/POST (Send level / Send point) Select one of the following two parameters to view in the grid. ❏ When the SEND LEVEL button is on The send levels of the signals sent from input channels to MIX buses are shown in the grid as bar graphs. Except for the fact that the send-sources are input channels and the send-destinations are MIX buses, the bar graph display is the same as in the MIX to MATRIX VIEW screen (MATRIX/ST function) (➥ p.240). To edit the send level of a signal, move the cursor to the grid where the desired channel and MIX bus intersect, and turn the [DATA] encoder. To switch a MIX send on/off, click the grid where the desired channel and MIX bus intersect. If the SEND LEVEL button is on, you can select a desired grid and copy its send level (pan) value to other channels (horizontal direction) or to other MIX buses (vertical direction), or switch all grids on/off simultaneously. To do so, move the cursor to the desired grid; then hold down the [SHIFT] key and press the [ENTER] key. (Alternatively, hold down the [SHIFT] key and click the desired grid.) When the following window appears, select one of the following choices to copy, and click the OK button. 3 A CH to MIX/MIX from CH Select one of the following two types of screen display. ❏ When the CH to MIX button is on The screen shows the status of the signals sent from a specific input channel (input channel / ST IN channel) to all MIX buses. (Use the scroll bar to see input channels that are not currently shown.) ❏ When the MIX from CH button is on The screen shows the status of the signals sent from all input channels to a specific MIX bus. LEVEL COPY [ALL MIX ] Copy the send level (pan) value of the selected grid to all MIX buses. LEVEL COPY [ALL CH ] Copy the send level (pan) value of the selected grid to all input channels. LEVEL COPY [ALL CH x ALL MIX] Copy the send level (pan) value of the selected grid to all input channels / all MIX buses. ALL OFF [ALL MIX ] Turn off the signals sent from the specified input channel to all MIX buses. ALL ON [ALL MIX ] Turn on the signals sent from the specified input channel to all MIX buses. ALL OFF [ALL CH ] Turn off the signals sent from all input channels to the specified MIX bus. 280 PM5D/PM5D-RH Owner's Manual Reference section