Yamaha PM5D Owner's Manual - Page 57
Using the Selected Channel GROUP
View all Yamaha PM5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
7 Using the Selected Channel section This chapter explains how you can use the SELECTED CHANNEL section to control input channels and output channels. About the SELECTED CHANNEL section The SELECTED CHANNEL section lets you edit the mix parameters of the currently selected input channel or output channel; it corresponds to a channel module of a conventional analog mixer. This section controls the channel that was last selected by pressing its [SEL] key. (In the case of an ST IN channel, FX TRN channel, or STEREO A/B channel, you will select either the L or the R channel.) However, you will be able to edit essentially all of the mix parameters (head amp settings, EQ/compressor/gate settings, output to the STEREO bus, DCA group and mute group assignments, etc.) using panel controls. Items in the SELECTED CHANNEL section 7 GROUP Here you can assign the currently selected channel to DCA groups and mute groups. (For details on DCA groups and mute groups ➥ p.74, 75) Using the Selected Channel section 3 4 5 12 A DCA [1]-[8] keys These keys assign the selected channel to DCA groups 1-8. The key LED for the assigned DCA group(s) will light. Input channels can use DCA groups 1-8, and output channels can use DCA groups 7/8. For DCA groups 7/ 8, input channels and output channels can both exist in the same-numbered group. B MUTE [1]-[8] keys These keys assign the selected channel to mute groups 1-8. The key LED for the assigned mute group(s) will light. Mute groups 1-8 allow you to mix input channels and output channels. C [RECALL SAFE] key This key switches Recall Safe on/off for the selected channel. If this key is on, the parameters of the corresponding channel will not be affected when a scene is recalled. The applicable parameters can be specified in the RECALL SAFE screen (SCENE function) (➥ p.166). D [MUTE SAFE] key This key switches Mute Safe on/off for the selected channel. If this key is on, the corresponding channel will be temporarily excluded from mute groups. E Level meter This indicates the input/output level of the selected channel. PM5D/PM5D-RH Owner's Manual Operating section 57