Yamaha PM5D Owner's Manual - Page 342
Level Meter Data - Parameter change, Time Counter Data, Time Code, 6.2 Effect module names
View all Yamaha PM5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 342 highlights
MIDI Data Format 4.6.2 Effect module names MODULE NAME Freeze Play button "FRZPLAY_" Freeze Record button "FRZREC__" channel 0:Effect1 - 7:Effect8 0:Effect1 - 7:Effect8 Nothing will happen if the Effect Type is different. 4.7 Level Meter Data - Parameter change - 4.7.1 Format (Parameter change) Once a Level Meter Request is received to enable transmission, the specified meter data will be transmitted at 50 msec intervals for a duration of ten seconds. If you want meter data to be transmitted continuously, you must transmit a Request at intervals of no longer than ten seconds. Reception This message is echoed if [Parameter change ECHO] is ON. Transmission Once transmission is enabled by a Request, the meter data specified in the Address will be transmitted on the [Rx CH] channel at a specific interval for a specific duration. (The transmission interval and the duration of transmission will differ between models of device.) Transmission is disabled when the power is cycled, or when PORT settings are changed. If [Parameter change ECHO] is ON, the message is transmitted without change. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture's ID number (YAMAHA) SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E Digital mixer MODEL ID 00001111 0F PM5D DATA CATEGORY 00100001 21 REMOTE LEVEL METER DATA 0mmmmmmm mm ADDRESS UL (See 4.7.3) 0mmmmmmm mm ADDRESS LU 0mmmmmmm mm ADDRESS LL 0ddddddd dd Data1 H (See 4.7.5) *1 0ddddddd dd Data1 L : : EOX 11110111 F7 End of exclusive *1 Two types of meter data are provided; data that uses the decay value of the DSP as-is, and data that is converted via a table according to the number of segments in the meter display. 4.7.2 Format (Parameter request) Reception This message is received if [Parameter change RX] is ON and [Rx CH] matches the Device number included in the SUB STATUS. This message is echoed if [Parameter change ECHO] is ON. When this is received, the meter data specified in the Address is transmitted on the [Rx CH] channel at a specific interval for a specific duration. If this is received with an Address UL = 0x7F, transmission of all meter data will stop (will be disabled) immediately. Transmission If [Parameter change ECHO] is ON, the message is transmitted without change. STATUS ID No. SUB STATUS GROUP ID MODEL ID DATA CATEGORY DATA EOX 11110000 F0 01000011 43 0011nnnn 3n 00111110 3E 00001111 0F 00100001 21 0mmmmmmm mm 0mmmmmmm mm 0mmmmmmm mm 0ccccccc ch 0ccccccc cl 11110111 F7 System exclusive message Manufacture's ID number (YAMAHA) n=0-15 (Device number=MIDI Channel) Digital mixer PM5D REMOTE LEVEL METER ADDRESS UL (See 4.7.3) ADDRESS LU ADDRESS LL Request Ch Total Number H Request Ch Total Number L End of exclusive 4.8 Time Counter Data - Time Code - 4.8.1 Format (Parameter change) When transmission is enabled by receiving a Remote Time Counter request, Time Counter data is transmitted at 50 ms intervals for a duration of ten seconds. If you want counter data to be transmitted continuously, you must transmit a Request at intervals of no longer than ten seconds. Reception This message is echoed if [Parameter change ECHO] is ON. Transmission When transmission is enabled by a request, Time Counter data is transmitted for a specific duration. Transmission is disabled when the power is cycled, or when PORT settings are changed. If [Parameter change ECHO] is ON, the message is transmitted without change. STATUS ID No. SUB STATUS GROUP ID MODEL ID DATA CATEGORY DATA EOX 11110000 F0 01000011 43 0001nnnn 1n 00111110 3E 00001111 0F 00101011 2b 0ddddddd dd 0ddddddd dd 0ddddddd dd 0ddddddd dd 11110111 F7 System exclusive message Manufacture's ID number (YAMAHA) n=0-15 (Device number=MIDI Channel) Digital mixer PM5D Time Counter TC Hour Minute Second Frame End of exclusive 4.8.2 Format (Parameter request) Reception This message is received if [Parameter change RX] is ON and [Rx CH] matches the Device number included in the SUB STATUS. This message is echoed if [Parameter change ECHO] is ON. When this message is received, Time Counter data is transmitted on the [Rx CH] channel for a specific duration. If a message is received with 0x7F as the second byte of the Address, data transmission will be stopped (disabled) immediately. Transmission If [Parameter change ECHO] is ON, the message is transmitted without change. STATUS ID No. SUB STATUS GROUP ID MODEL ID DATA CATEGORY DATA EOX 11110000 F0 01000011 43 0011nnnn 3n 00111110 3E 00001111 0F 00101011 2b 0ddddddd dd 11110111 F7 System exclusive message Manufacture's ID number (YAMAHA) n=0-15 (Device number=MIDI Channel) Digital mixer PM5D Time Counter TC 0: Request transmission 0x7F: Request stop transmission End of exclusive 342 PM5D/PM5D-RH Owner's Manual Reference section