Yamaha PM5D Owner's Manual - Page 204

SYS/W.CLOCK function If you daisy-chain two to four PM5D units (i.e., connect the first unit's CASCADE OUT → second unit's CASCADE IN, and the second unit's CASCADE OUT → third unit's CASCADE IN. Up to four units can be connected.), set the PM5D located last in the chain to MASTER, and the remaining PM5D units to SLAVE. Turn the BI-DIRECTION button Off for all units. CASCADE CASCADE IN OUT Audio signals of A PM5D A (Cascade slave) CASCADE MODE= SLAVE BI-DIRECTION= OFF CASCADE CASCADE IN OUT Audio signals of A+B PM5D B (Cascade slave) CASCADE MODE= SLAVE BI-DIRECTION= OFF CASCADE CASCADE IN OUT Audio signals of A+B+C PM5D C (Cascade slave) CASCADE MODE= SLAVE BI-DIRECTION= OFF CASCADE CASCADE IN OUT Audio signals of A+B+C+D PM5D D (Cascade master) CASCADE MODE= MASTER BI-DIRECTION= OFF In this state, the SLAVE units will follow when you operate the MASTER unit. The final mix of all signals will be output from the PM5D that is connected last in the chain. M CASCADE ENABLE/DISABLE Turns the Cascade function on/off. Note If you edit the settings of the CASCADE CONNECTION parameters (7-L), the cascade function will temporarily be reset to Off. N DME CONTROL This button accesses the DME CONTROL screen (➥ p.182). CASCADE screen Here you can make various settings related to cascade connection. CASCADE 1 2 A CASCADE ENABLE/DISABLE Enables/disables cascade connection. B CASCADE LINK Here you can select the operations and parameters that will be linked when multiple PM5D units are cascadeconnected. You can select the following items. • SCENE RECALL Scene recall operations / Recall undo operations • SCENE STORE/EDIT Scene store operations, store undo operations, title editing, sorting • CUE/SOLO LOGIC Cue/Solo operations (however, all Cue settings are cleared when linking occurs) • DIMMER ON/OFF Dimmer effect (including talkback dimmer) • PAGE CHANGE Switching the display screen 204 PM5D/PM5D-RH Owner's Manual Reference section