Yamaha PM5D Owner's Manual - Page 255

Information shown in the display Function menu E Grid For each input channel (vertical column), this grid lets you can patch one or more output ports (horizontal row) to be used as insert-outs. Currently-patched grids are indicated by a symbol. By clicking a grid location you can set/cancel patching. The red lines at the left and top indicate the grid location to which you move the cursor. Hint Operations in the grid are the same for all of the patching screens. For details, refer to the Hint on p.252. F Output port From the top, this area indicates the type of output port, the ID number, the output channel number, and the number of input channels assigned. The following types of output port can be patched as insert-out. SLOT OUT FX IN GEQ IN 2TR OUT Output channels of an I/O card installed in slots 1-4 L/R inputs of internal effects 1-8 Inputs of GEQ modules 1-12 L/R channels of 2TR OUT DIGITAL jacks 1-3 Hint • The port number is grayed-out for ports that are currently unavailable. • For SLOT OUT ports that are also being output to the CASCADE connector, the port number of the CASCADE connector is displayed in yellow instead of the SLOT OUT port number. • If you select GEQ IN as an insert-out, the output of the same GEQ module will automatically be selected as the insert-in. 8 H LIBRARY button This button accesses the INPUT PATCH LIBRARY screen (➥ p.257), where you can store/recall input channel patch library settings. Note To enable the insert ins/outs that you assigned to input channels in this screen, you need to turn Insert on for the corresponding input channel in the INSERT/DIRECT OUT POINT screen (INPUT PATCH function) (➥ p.256). However, insertion is automatically enabled if you assigned insert in/out to a GEQ. Hint When operating from the panel, you can move the cursor from the right side of the screen to the left side (or vice versa) by holding down the [SHIFT] key and using the CURSOR keys. 7 Global functions Output functions Input functions Appendices G Input port From the top, this area indicates the type of input port, the ID number, L/R, the input channel number, and the total number of input channels (including insertin) that are patched to each input port. You can select the following input ports. AD IN AD ST IN SLOT IN FX OUT GEQ OUT 2TR IN INPUT jacks 1-48 ST IN jacks 1-4 L/R Input channels of an I/O card installed in slots 1-4 L/R outputs of internal effects 1-8 Outputs of GEQ modules 1-12 L/R channels of 2TR IN DIGITAL jacks 1-3 or 2TR IN ANALOG jacks 1/2 PM5D/PM5D-RH Owner's Manual Reference section 255