Yamaha PM5D Owner's Manual - Page 61
HPF (High Pass Filter), EQUALIZER, Input channels
View all Yamaha PM5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
J COMP [GAIN] encoder Specifies the gain of the signal that has passed through the compressor. HPF (High Pass Filter) Here you can edit high pass filter parameters for the selected channel. This section is available only if an input channel is selected. 2 1 3 Hint • Input channels also provide an HPF that is independent of the four-band EQ. • Output channels do not have an independent HPF, but instead allow you to switch the LOW band type to HPF. • Switching the equalizer type to HPF or LPF can be done in the EQ PARAM screen (➥ p.225) 45 6 1 2 3 7 8 7 Using the Selected Channel section 9 A HPF [FREQUENCY] encoder Specifies the cutoff frequency of the high pass filter. B HPF [FREQUENCY] indicator Indicates the currently specified high pass filter cutoff frequency, in units of Hz. C HPF [ON] key Switches the high pass filter on/off. EQUALIZER Here you can edit equalizer parameters for the selected channel. The equalizer structure differs as follows between input channels and output channels. ❏ Input channels You can use a four-band peak/dip type EQ (HIGH, HIGH MID, LOW MID, LOW). The HIGH band can be switched to an LPF or shelving type; the LOW band can be switched to a shelving type. ❏ Output channels If a MIX channel or STEREO A/B is selected, you can use an eight-band peak/dip type EQ. (Operation is divided into UPPER and LOWER groups of four bands each.) For MATRIX channels, you can use a four-band peak/dip type EQ. For any output channel, the HIGH band can be switched to shelving or LPF. The LOW band can be switched to shelving or HPF. For MIX channels and STEREO A/B channels, this can be specified for UPPER and LOWER, allowing you to apply shelving or filtering twice. A EQ [ON] key Switches the equalizer on/off for the selected channel. B EQ [UPPER] key C EQ [LOWER] key If a MIX channel or STEREO A/B channel is selected, these keys select the four-band group (UPPER or LOWER) that you will edit. (The LED of the currently selected key will light.) If any other channel is selected, the LEDs of both keys will be dark. Hint By simultaneously holding down the EQ [UPPER] key and EQ [LOWER] key, you can return the EQ GAIN settings of the selected channel to a flat state. D EQ [ ] key If this key is on, the corresponding HIGH band EQ type will be switched to shelving. In this case, the HIGH band EQ [Q] knob will have no function. PM5D/PM5D-RH Owner's Manual Operating section 61