Yamaha RX-A830 RX-A830 Owners Manual - Page 16
Setting the speaker impedance, Press MAIN ZONE
View all Yamaha RX-A830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
1 Speaker placement 2 3 4 5 6 7 8 9 10 ■ Setting the speaker impedance Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the speaker impedance to "6 Ω MIN". In this case, you can also use 4-ohm speakers as the front speakers. 1 Before connecting speakers, connect the power cable to an AC wall outlet. 2 While holding down STRAIGHT on the front panel, press MAIN ZONE z. MAIN ZONE z STRAIGHT 3 Check that "SP IMP." is displayed on the front display. SP IMP. 8 MIN 4 Press STRAIGHT to select "6 Ω MIN". 5 Press MAIN ZONE z to set the unit to standby mode and remove the power cable from the AC wall outlet. You are now ready to connect the speakers. PREPARATIONS ➤ Placing speakers En 16
PREPARATIONS
➤
Placing speakers
En
16
■
Setting the speaker impedance
Under its default settings, the unit is configured for 8-ohm speakers. When connecting
6-ohm speakers, set the speaker impedance to “6
Ω
MIN”. In this case, you can also
use 4-ohm speakers as the front speakers.
1
Before connecting speakers, connect the power cable to an AC wall
outlet.
2
While holding down STRAIGHT on the front panel, press
MAIN ZONE
z
.
3
Check that “SP IMP.” is displayed on the front display.
4
Press STRAIGHT to select “6
Ω
MIN”.
5
Press MAIN ZONE
z
to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
MAIN ZONE
z
STRAIGHT
SP±IMP.±±8±MIN
1
Speaker placement
2
3
4
5
6
7
8
9
10