Yamaha RX-A830 RX-A830 Owners Manual - Page 92

Video

Get Yamaha RX-A830 PDF manuals and user guides View all Yamaha RX-A830 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 92 highlights

■ Max Volume Sets the maximum volume to prevent excessive loudness. Setting range -30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB Default +16.5 dB ■ Initial Volume Sets the initial volume when the receiver is turned on. Settings Off (default) On Sets the level to the volume level of the unit when it last entered standby mode. Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB increments). (This setting works only when the initial volume is set lower than "Max Volume".) ■ Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level when the volume is adjusted. Settings Off On (default) Does not adjust the effect level automatically. Adjusts the effect level automatically. Video Configures the video output settings. ■ Video Mode Enables/disables the video signal processing (resolution and aspect ratio). Settings Direct (default) Processing Disables the video signal processing. Enables the video signal processing. Select a resolution and an aspect ratio in "Resolution" and "Aspect". • When "Video Mode" is set to "Direct", the unit transmits video signals with the least circuitry in order to reduce video output delay. • When "Video Mode" is set to "Processing" and the resolution is being converted, short messages are not displayed on the TV screen. ❑ Resolution Selects a resolution to output HDMI video signals when "Video Mode" is set to "Processing". Settings Through Auto (default) 480p/576p, 720p, 1080i, 1080p, 4K Does not convert the resolution. Selects a resolution automatically in accordance with TV resolution. Output video signals with a selected resolution. (Only the resolutions supported by your TV are selectable.) • If you need to select a resolution that is not supported by your TV, set "MON.CHK" (p.103) in the "ADVANCED SETUP" menu to "SKIP" and try again. (Note that the output video may not be displayed on your TV normally.) CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 92

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
CONFIGURATIONS
➤
Configuring various functions (Setup menu)
En
92
■
Max Volume
Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
■
Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
■
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level when the volume
is adjusted.
Settings
Video
Configures the video output settings.
■
Video Mode
Enables/disables the video signal processing (resolution and aspect ratio).
Settings
•
When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to
reduce video output delay.
•
When “Video Mode” is set to “Processing” and the resolution is being converted, short messages are not
displayed on the TV screen.
❑
Resolution
Selects a resolution to output HDMI video signals when “Video Mode” is set to
“Processing”.
Settings
•
If you need to select a resolution that is not supported by your TV, set “MON.CHK” (p.103) in the
“ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be displayed on
your TV normally.)
Off (default)
Sets the level to the volume level of the unit when it last entered
standby mode.
On
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
increments).
(This setting works only when the initial volume is set lower than “Max
Volume”.)
Off
Does not adjust the effect level automatically.
On (default)
Adjusts the effect level automatically.
Direct (default)
Disables the video signal processing.
Processing
Enables the video signal processing.
Select a resolution and an aspect ratio in “Resolution” and “Aspect”.
Through
Does not convert the resolution.
Auto (default)
Selects a resolution automatically in accordance with TV resolution.
480p/576p, 720p,
1080i, 1080p, 4K
Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)