Yamaha RX-A830 RX-A830 Owners Manual - Page 86
Setup menu items, CONFIGURATIONS, Configuring various functions Setup menu
View all Yamaha RX-A830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Setup menu items Menu Speaker Sound Video HDMI Item Auto Setup Power Amp Assign Front Center Surround Configuration Surround Back Front Presence Manual Setup Subwoofer Extra Bass Bass Cross Over Distance Level Parametric EQ Test Tone Delay Enable Lipsync Auto/Manual Select Adjustment Dynamic Range Max Volume Initial Volume Adaptive DSP Level Video Mode HDMI Control Audio Output Standby Through Function Page Automatically optimizes the speaker settings (YPAO). 35 Selects a speaker system. 88 Selects the size of the front speakers. 88 Selects whether or not a center speaker is connected and its size. 88 Selects whether or not surround speakers are connected and their size. 88 Selects whether or not surround back speakers are connected and their size. 89 Selects whether or not presence speakers are connected. 89 Selects whether or not a subwoofer is connected and its phase. 89 Sets the speakers to produce the front channel low-frequency components. 89 Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to "Small". 89 Sets the distance between each speaker and listening position. 90 Adjusts the volume of each speaker. 90 Adjusts the tone with an equalizer. 90 Enables/disables the test tone output. 91 Enables/disables the Lipsync adjustment for each input source. 91 Selects the method to adjust the delay between video and audio output. 91 Adjusts the delay between video and audio output manually. 91 Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 91 Sets the maximum volume to prevent excessive loudness. 92 Sets the initial volume for when this receiver is turned on. 92 Selects whether to automatically adjust the CINEMA DSP effect level when the volume is adjusted. 92 Enables/disables the video signal processing (resolution and aspect ratio). 92 Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 93 Selects a device to output audio. 94 Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 94 CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 86