Yamaha RX-A830 RX-A830 Owners Manual - Page 79
Rename/Icon Select, Audio In, Decoder Mode, Setup procedure - reset
View all Yamaha RX-A830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
■ Rename/Icon Select Changes the input source name and icon displayed on the front display or TV screen. Input sources HDMI 1-7, V-AUX, AV 1-6, AUDIO 1-2, USB, PHONO* * Except for U.S.A. and Canada models ■ Setup procedure 1 Use the cursor keys (e/r) to select a template and press the cursor key (w). • You cannot change the template or icon for "USB" when an iPod is connected. 2 Use the cursor keys (e/r) to select an icon and press the cursor key (w). 3 Press ENTER to enter the name edit screen. 4 Use the cursor keys and ENTER to rename and select "ENTER" to confirm the entry. • To clear the entry, select "CLEAR". 5 Use the cursor keys to select "OK" and press ENTER. ■ Audio In Combines the video jack of the selected input source with an audio jack of others. For example, use this function in the following cases. • Connecting a playback device that supports HDMI video output, but not HDMI audio output • Connecting a playback device that has component video jacks and analog stereo jacks (such as game consoles) Input sources HDMI 1-7, AV 1-2 ■ Setup procedure (To input audio through a digital optical jack) Select "AV1" or "AV4" and connect the device to the unit's corresponding audio jacks with a digital optical cable. (To input audio through a digital coaxial jack) Select "AV2" or "AV3" and connect the device to the unit's corresponding audio jacks with a digital coaxial cable. (To input audio through analog audio jacks) Select "AV5", "AV6", "AUDIO1", or "AUDIO2", and connect the device to the unit's corresponding audio jacks with a stereo pin cable. ■ Decoder Mode Sets the format of digital audio playback to "DTS". For example, if the unit does not detect DTS audio and outputs noise, set "Decoder Mode" to "DTS". Input sources HDMI 1-7, V-AUX, AV 1-4 Settings Auto (default) DTS Automatically selects an audio format to match the input audio signal. Selects DTS only. (Other audio signals are not reproduced.) • To restore the default setting, select "RESET". 6 To exit from the menu, press ON SCREEN. CONFIGURATIONS ➤ Configuring input sources (Input menu) En 79