Yamaha RX-A830 RX-A830 Owners Manual - Page 95
Network
View all Yamaha RX-A830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Network Configures the network settings. ■ IP Address Configures the network parameters (such as IP address). ❑ DHCP Select whether to use a DHCP server. Settings Off On (default) Does not use a DHCP server. Configure the network parameters manually. For details, see "Manual network settings". Uses a DHCP server to automatically obtain the unit's network parameters (such as IP address). ■ Manual network settings 1 Set "DHCP" to "Off". 2 Use the cursor keys (q/w) to select a parameter type and press ENTER. IP Address Subnet Mask Default Gateway DNS Server (P) DNS Server (S) Specifies an IP address. Specifies a subnet mask. Specifies the IP address of the default gateway. Specifies the IP address of the primary DNS server. Specifies the IP address of the secondary DNS server. 3 Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value. 4 To confirm the setting, press ENTER. 5 To configure another network parameter, repeat steps 2 to 4. 6 To save the changes, use the cursor keys to select "OK" and press ENTER. 7 To exit from the menu, press ON SCREEN. ■ Network Standby Selects whether the unit can be turned on from other network devices (network standby). Settings Off (default) On Disables the network standby function. Enables the network standby function. (The unit consumes more power than when "Off" is selected.) ■ MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. ❑ Filter Enables/disables the MAC address filter. Settings Off (default) On Disables the MAC address filter. Enables the MAC address filter. In "MAC Address 1-10", specify the MAC addresses of the network devices that will be permitted access to the unit. ❑ MAC Address 1-10 Specifies the MAC addresses (up to 10) of the network devices that will be permitted access to the unit when "Filter" is set to "On". ■ Procedure 1 Use the cursor keys (q/w) to select "MAC Address 1-5" or "MAC Address 6-10" and press ENTER. 2 Use the cursor keys (q/w) to select an MAC address number and press ENTER. 3 Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value. 4 To confirm the setting, press ENTER. 5 To save the changes, use the cursor keys to select "OK" and press ENTER. 6 To exit from the menu, press ON SCREEN. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 95