ZyXEL GS-1548 User Guide - Page 74
ToS Based QoS, Table 19, Apply Change, Settings - reviews
View all ZyXEL GS-1548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 11 QoS The following table describes the labels in this screen. Table 19 DSCP Based QoS LABEL DESCRIPTION Mode Select DSCP Based QoS to specify mapping rules between DSCP priority and IEEE 802.1p priority for incoming packets on the Switch. Change Priority Configure the following: • DSCP - Select the DSCP priority for which you want to change a priority mapping. • Priority - Select the IEEE 802.1p priority you want to assign to the packets with the DSCP priority you specified in the DSCP field. Click Change to view your changed settings. DSCP, Priority Apply Change Settings Note: The changes are not applied until you click Apply Change Settings. This is a summary table of your DSCP to IEEE 802.1p priority mappings. The DSCP column indicates the DSCP values of the incoming packets and the Priority column indicates what IEEE 802.1p priority gets assigned to those packets. Click this when you have reviewed the changes you want to make and you want to save them to the Switch's memory. 11.4.5 ToS Based QoS You can configure the Switch to assign a IEEE 802.1p priority to packets coming into the Switch with Type of Service (ToS) priority assigned to them. Select ToS Based QoS in the QoS Enhancement Setting screen to view the following screen. Figure 42 ToS Based QoS 74 GS-1524/GS-1548 User's Guide