ZyXEL GS1910-24 User Guide - Page 13

Mounting the Switch on a Rack, the rack

Get ZyXEL GS1910-24 PDF manuals and user guides View all ZyXEL GS1910-24 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Chapter 2 Hardware Installation and Connection 2 Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting bracket holes into the Switch. 3 Repeat steps 1 and 2 to install the second mounting bracket on the other side of the Switch. 4 You may now mount the Switch on a rack. Proceed to the next section. 2.2.3 Mounting the Switch on a Rack 1 Position a mounting bracket (that is already attached to the Switch) on one side of the rack, lining up the two screw holes on the bracket with the screw holes on the side of the rack. Figure 7 Mounting the Switch on a Rack 2 Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting bracket holes into the rack. 3 Repeat steps 1 and 2 to attach the second mounting bracket on the other side of the rack. GS1910/XGS1910 Series User's Guide 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Chapter 2 Hardware Installation and Connection
GS1910/XGS1910 Series User’s Guide
13
2
Using a #2 Philips screwdriver, install the M3 flat head screws through the
mounting bracket holes into the Switch.
3
Repeat steps
1
and
2
to install the second mounting bracket on the other side of
the Switch.
4
You may now mount the Switch on a rack. Proceed to the next section.
2.2.3
Mounting the Switch on a Rack
1
Position a mounting bracket (that is already attached to the Switch) on one side of
the rack, lining up the two screw holes on the bracket with the screw holes on the
side of the rack.
Figure 7
Mounting the Switch on a Rack
2
Using a #2 Philips screwdriver, install the M5 flat head screws through the
mounting bracket holes into the rack.
3
Repeat steps
1
and
2
to attach the second mounting bracket on the other side of
the rack.