ZyXEL GS1910-24 User Guide - Page 28

Chapter 4 The Web Configurator

GS1910/XGS1910 Series User’s Guide

28

Ports

This link takes you to a screen where you can configure speed, flow control, the

maximum frame size and power control settings for individual Switch ports.

Security

Switch

This link takes you to screens where you can change the system login password, manage

the privilege levels for login accounts, and configure SNMP, remote management and

RMON (Remote Network Monitor).

Network

This link takes you to screens where you can set the maximum number of MAC addresses

to learn on a port, configure IEEE 802.1x port authentication as well as MAC

authentication for clients communicating via the Switch, configure the access control list,

DHCP snooping, DHCP relay, IP source guard and ARP inspection settings.

AAA

This link takes you to a screen where you can configure authentication and accounting

services via external servers. The external servers can be either RADIUS (Remote

Authentication Dial-In User Service) or TACACS+ (Terminal Access Controller Access-

Control System Plus).

Aggregation

Static

This link takes you to a screen where you can logically aggregate physical links to form

one logical, higher-bandwidth link.

LACP

This link takes you to a screen where you can configure dynamic link aggregation.

Spanning Tree

Bridge

Settings

This link takes you to a screen where you can activate one of the STP modes and

configure the STP settings on the Switch.

MSTI Mapping

This link takes you to a screen where you can configure the MSTI (Multiple Spanning Tree

Instance) to VLAN mapping settings.

MSTI Priorities

This link takes you to a screen where you can configure MSTI priority settings.

CIST Ports

This link takes you to a screen where you can configure CIST (Common and Internal

Spanning Tree) ports.

MSTI Ports

This link takes you to a screen where you can configure MSTI ports.

MVR

This link takes you to a screen where you can create multicast VLANs and select the

receiver port(s) and a source port for each multicast VLAN.

IPMAC

IGMP

Snooping

This link takes you to screens where you can configure IGMP snooping.

MLD Snooping

This link takes you to screens where you can configure MLD snooping.

LLDP

LLDP

This link takes you to a screen where you can configure LLDP (Link Layer Discovery

Protocol) on the Switch. LLDP allows a network device to advertise its identity and

capabilities on the local network. It also allows the device to maintain and store

information from adjacent devices which are directly connected to the network device.

LLDP-MED

This link takes you to a screen where you can configure Link Layer Discovery Protocol-

Media Endpoint Discovery (LLDP- MED) for multimedia devices and IP Phones.

MAC Table

This link takes you to a screen where you can view the MAC address and VLAN ID of a

device attached to a port. You can also view what kind of MAC address it is.

VLANs

VLAN

Membership

This link takes you to a screen where you can configure and view 802.1Q VLAN

parameters for the Switch.

Ports

This link takes you to a screen where you can configure the static VLAN (IEEE 802.1Q)

settings on a port.

Private VLANs

Table 4

Navigation Panel Links

(continued)

LINK

DESCRIPTION

Section	Page
GS1910/XGS1910 Series	1
Table of Contents	3
Getting to Know Your Switch	5
1.1 Introduction	5
1.1.1 Bridging Example	5
1.1.2 High Performance Switching Example	6
1.1.3 Gigabit Ethernet to the Desktop	7
1.1.4 IEEE 802.1Q VLAN Application Example	7
1.1.5 IPv6 Support	8
1.2 Ways to Manage the Switch	8
1.3 Good Habits for Managing the Switch	8
Hardware Installation and Connection	11
2.1 Freestanding Installation	11
2.2 Mounting the Switch on a Rack	12
2.2.1 Rack-mounted Installation Requirements	12
2.2.2 Attaching the Mounting Brackets to the Switch	12
2.2.3 Mounting the Switch on a Rack	13
Hardware Overview	15
3.1 Front Panel Connections	15
3.1.1 Ethernet Ports	17
3.1.2 Dual Personality Interfaces	18
3.1.3 SFP/SFP+ Slots	18
3.1.4 Console Port	20
3.2 Rear Panel	20
3.2.1 Power Connector	21
3.3 LEDs	22
The Web Configurator	25
4.1 Introduction	25
4.2 System Login	25
4.3 The Web Configurator Layout	26
4.3.1 Change Your Password	32
4.4 Switch Lockout	32
4.5 Logging Out of the Web Configurator	32
4.6 Help	32
Tutorials	33
5.1 How to Change Switch Management IP Address	33
5.2 How to Configure Login Accounts and Privilege Levels	34
5.3 How to Manage a Configuration File	36
5.3.1 Backing up a Configuration File	36
5.3.2 Restoring a Configuration File	37
5.4 How to Create a VLAN	38
5.4.1 Setting Port VID	39
5.5 How to Set Up a Guest VLAN with IEEE 802.1x Authentication	41
5.5.1 Creating a VLAN for Port which is not IEEE 802.1x enabled	41
5.5.2 Enabling IEEE 802.1x Port Authentication and Guest VLAN	42
5.6 How to Use Private VLAN to Do Port Isolation in a VLAN	44
5.6.1 Creating a Private VLAN	44
5.6.2 Enabling Port Isolation	45
5.7 How to Use IP Source Guard and DHCP Snooping to Prevent Spoofed Traffic	45
5.8 How to Use DHCP Relay on the Switch	48
5.8.1 Creating a VLAN	49
5.8.2 Configuring DHCP Relay	49
5.8.3 Troubleshooting	50
5.9 How to Use Link Aggregation to Group Multiple Ports into One Logical Link	50
5.9.1 Static Port Trunking	50
5.9.2 Dynamic Port Trunking	51
5.10 How to Analyze Traffic Using Mirroring	52
5.10.1 Configuring Mirroring	53
5.10.2 Configuring Remote Port Mirroring	54
5.11 How to Use IGMP Snooping to Reduce Multicast Traffic Passing through your Switch	60
5.12 How to Configure Access Control List (ACL) for Packets Filtering	63
5.13 How to Reset the Switch via the Console Port	66
Troubleshooting	69
6.1 Power, Hardware Connections, and LEDs	69
6.2 Switch Access and Login	70
Legal Information	73

ZyXEL GS1910-24 User Guide - Page 28

Table 4, DESCRIPTION - link aggregation

Page 28 highlights