ZyXEL GS1910-24 User Guide - Page 20

Console Port, 3.2 Rear Panel, Console Port - 48hp

Get ZyXEL GS1910-24 PDF manuals and user guides View all ZyXEL GS1910-24 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Chapter 3 Hardware Overview 2 Pull the transceiver out of the slot. Figure 17 Transceiver Removal Example 3.1.4 Console Port For local management, you can use a computer with terminal emulation software configured to the following parameters: • VT100 terminal emulation • 115200 bps • No parity, 8 data bits, 1 stop bit • No flow control Connect the male 9-pin end of the RS-232 console cable to the console port of the Switch. Connect the female end to a serial port (COM1, COM2 or other COM port) of your computer. 3.2 Rear Panel The following figure shows the rear panel of the Switch. The rear panel contains a connector for the power receptacle. The GS1910-48 and GS1910-48HP also have a console port on the rear panel. The XGS1910-48 has one console port and two SFP+ slots on the rear panel. Figure 18 Rear Panel: GS1910-24 20 GS1910/XGS1910 Series User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Chapter 3 Hardware Overview
GS1910/XGS1910 Series User’s Guide
20
2
Pull the transceiver out of the slot.
Figure 17
Transceiver Removal Example
3.1.4
Console Port
For local management, you can use a computer with terminal emulation software
configured to the following parameters:
•
VT100 terminal emulation
•
115200 bps
•
No parity, 8 data bits, 1 stop bit
•
No flow control
Connect the male 9-pin end of the RS-232 console cable to the console port of the
Switch. Connect the female end to a serial port (COM1, COM2 or other COM port)
of your computer.
3.2
Rear Panel
The following figure shows the rear panel of the Switch. The rear panel contains a
connector for the power receptacle. The GS1910-48 and GS1910-48HP also have
a console port on the rear panel. The XGS1910-48 has one console port and two
SFP+ slots on the rear panel.
Figure 18
Rear Panel: GS1910-24