ZyXEL GS1910-24 User Guide - Page 40
Configuration, VLANs > Ports, Port VLAN Mode, Specific, Untag_all, TX Tag, Untag_pvid
View all ZyXEL GS1910-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 5 Tutorials In the example network, configure 2 as the port VID on port 1 so that any untagged frames received on that port get sent to VLAN 2. Figure 29 Port VID Example 1 Click Configuration > VLANs > Ports in the navigation panel. 2 Set Port VLAN Mode to Specific and enter 2 in the Port VLAN ID field for port 1. 3 To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames properly, you can either select Untag_all in the TX Tag field to set the Switch to remove any VLAN tags before sending or leave the TX Tag field at Untag_pvid to have the Switch remove a frame's VLAN tag when the frame's VLAN ID is the same as the PVID of the port on which the frame is transmitted. 4 click Save to save your changes back to the Switch 40 GS1910/XGS1910 Series User's Guide