ZyXEL GS1910-24 User Guide - Page 42

Enabling IEEE 802.1x Port Authentication and Guest VLAN, Configuration, VLANs > Ports

Get ZyXEL GS1910-24 PDF manuals and user guides View all ZyXEL GS1910-24 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Chapter 5 Tutorials 5 Click Save to save the settings to the Switch. 6 Click Configuration > VLANs > Ports in the navigation panel. 7 Set Port VLAN Mode to Specific and enter 200 in the Port VLAN ID field for port 10 to add a tag to incoming untagged frames received on these ports so that the frames are forwarded to the VLAN group that the tag defines. 8 To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames properly, select Untag_all in the TX Tag field to set the Switch to remove VLAN tags before sending frames out of these ports. 9 click Save to save your changes back to the Switch 5.5.2 Enabling IEEE 802.1x Port Authentication and Guest VLAN Follow the steps below to enable port authentication to validate access to ports 1~8 to clients based on a RADIUS server. 1 Click Configuration > Security > Network > NAS. Select Enabled in the Mode field to activate IEEE 802.1x authentication on the Switch. 42 GS1910/XGS1910 Series User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Chapter 5 Tutorials
GS1910/XGS1910 Series User’s Guide
42
5
Click
Save
to save the settings to the Switch.
6
Click
Configuration
>
VLANs > Ports
in the navigation panel.
7
Set
Port VLAN Mode
to
Specific
and enter 200 in the
Port VLAN ID
field for port 10 to add a tag
to incoming untagged frames received on these ports so that the frames are forwarded to the VLAN
group that the tag defines.
8
To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames properly,
select
Untag_all
in the
TX Tag
field to set the Switch to remove VLAN tags before sending frames
out of these ports.
9
click
Save
to save your changes back to the Switch
.
5.5.2
Enabling IEEE 802.1x Port Authentication and Guest VLAN
Follow the steps below to enable port authentication to validate access to ports 1~8 to clients based
on a RADIUS server.
1
Click
Configuration
>
Security > Network > NAS
. Select
Enabled
in the
Mode
field to activate
IEEE 802.1x authentication on the Switch.