ZyXEL GS1910-24 User Guide - Page 43

Reauthentication Enabled, Guest VLAN Enabled, Admin State, Port-based 802.1x

Get ZyXEL GS1910-24 PDF manuals and user guides View all ZyXEL GS1910-24 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Chapter 5 Tutorials 2 Select the Reauthentication Enabled check box to have a subscriber periodically re-enter his or her username and password to stay connected to the port. 3 Select the Guest VLAN Enabled check box and enter the guest VLAN ID (200 in this example) to enable the guest VLAN on the Switch. The Switch will automatically create the guest VLAN and configure the IEEE 802.1x-enabled ports as a member of the guest VLAN. 4 Set Admin State to Port-based 802.1x for ports 1 to 8 to turn on IEEE 802.1x authentication on these ports. 5 Select the Guest VLAN Enabled check box on ports 1, 2 and 3. The Switch puts unauthenticated clients in the specified guest VLAN. 6 Click Save. Clients that attach to port 1, 2 or 3 and fail to authenticate with the RADIUS server now should be in VLAN 200 and can access the Internet via the Internet access gateway connected to port 10 which is also in VLAN 200, but cannot communicate with devices in VLAN 1. GS1910/XGS1910 Series User's Guide 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Chapter 5 Tutorials
GS1910/XGS1910 Series User’s Guide
43
2
Select the
Reauthentication Enabled
check box to have a subscriber periodically re-enter his or
her username and password to stay connected to the port.
3
Select the
Guest VLAN Enabled
check box and enter the guest VLAN ID (200 in this example) to
enable the guest VLAN on the Switch. The Switch will automatically create the guest VLAN and
configure the IEEE 802.1x-enabled ports as a member of the guest VLAN.
4
Set
Admin State
to
Port-based 802.1x
for ports 1 to 8 to turn on IEEE 802.1x authentication on
these ports.
5
Select the
Guest VLAN Enabled
check box on ports 1, 2 and 3. The Switch puts unauthenticated
clients in the specified guest VLAN.
6
Click
Save
. Clients that attach to port 1, 2 or 3 and fail to authenticate with the RADIUS server now
should be in VLAN 200 and can access the Internet via the Internet access gateway connected to
port 10 which is also in VLAN 200, but cannot communicate with devices in VLAN 1.