ZyXEL NSA-220 Plus User Guide - Page 106

Chapter 4 System Setting 4.2 The Server Name Screen Click System Setting > Server Name to open the following screen. Use this screen to configure your CIFS settings. In this screen you can set your server name and specify if your NSA is a part of a workgroup or domain. Note: CIFS cannot be disabled on the NSA. Figure 19 System Setting > Server Name The following table describes the labels in these screens. Table 14 System Setting > Server Name LABEL Server Name DESCRIPTION Enter a name to identify your NSA on the network in this field. Description Workgroup Name You can enter up to 15 alphanumeric characters with minus signs allowed but not as the last character. The name must begin with an alphabetic character (a-z) and is NOT case sensitive. Add text here to describe the NSA if the Server Name field was not enough. Use up to 61 characters. You can use all characters except the following Type your workgroup name in this field. A workgroup is a group of computers on a network that can share files.These user accounts are maintained on the NSA. Prevent NSA From Being Master Browser Apply Reset You can enter up to 15 alphanumeric characters with minus signs allowed but not as the last character. The name must begin with an alphabetic character (a-z) and is NOT case sensitive. Select this option if computers in your workgroup are named with non-English characters (such as Chinese and Russian). When you perform a search in the workgroup, this option allows you to locate computers named with non-English characters. Click this to save your changes. Click this to restore previously saved settings. 106 NSA-220 Plus User's Guide