ZyXEL NSA-220 Plus User Guide - Page 128
RESET, Table 24, Network > TCP/IP continued - ndu
View all ZyXEL NSA-220 Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Chapter 6 Network Table 24 Network > TCP/IP (continued) LABEL DESCRIPTION IP Subnet Mask Type an IP subnet mask in this field. Default Gateway Type a default gateway address in this field. DNS DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice versa. If you have the IP address(es) of the DNS server(s), enter them. Dynamic Select the option to have the NSA get a DNS server address automatically. Static Select this option to choose a static DNS server address. Type the DNS server IP address(es) into the fields below. Primary DNS Server Type a primary DNS server IP address. Secondary DNS Server Type a secondary DNS server IP address. HTTP (Web Configurator) Enable Another Select this to configure an additional HTTP port for accessing the web Web Configuration configurator. Specify a number in the Port Number field. Port Jumbo Frames Jumbo frames improve network performance. You must have a 1 Gbps (Gigabit Ethernet) network that supports jumbo frames. Select the largest size of frame that all of your network devices (including computer Ethernet cards and switches, hubs, or routers) support. Network Diagnostic Tool Apply Reset Note: If you enable jumbo frames on the NSA in a network that does not support them, you will lose access to the NSA. If this occurs, you will have to restore the factory default configuration. Push the RESET button on the NSA's rear panel and release it after you hear a beep. Use this section to test the network connection to a particular IP address or domain name. Select an address or type it into the field. Then click Ping to have the NSA send a packet to test the network connection. If the NSA is able to "ping" the host, the network connection is OK. Click this to save your TCP/IP configurations. After you click Apply, the NSA restarts. Wait until you see the Login screen or until the NSA fully boots and then use the NDU to rediscover it. Click this to restore your previously saved settings. 128 NSA-220 Plus User's Guide