ZyXEL NSA-220 Plus User Guide - Page 285
Enabling Scripting of Safe ActiveX Controls, I forgot the password.
View all ZyXEL NSA-220 Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 285 highlights
Chapter 14 Troubleshooting 1 Press and hold the RESET button (for about two seconds) until you hear a beep, and then release it. 2 The NSA automatically restarts to complete the reset. I forgot the password. • The default password is 1234. • If you have changed the password and forgotten it, you will have to reset the NSA. The NDU cannot discover my NSA. • Confirm that the computer running the NDU has a network connection. See the section on the NSA's LAN connection for related information. • The computer running the NDU can only discover NSAs in the same subnet. NSAs connected to the same switch or router as your NDU computer are usually in the same subnet unless the router is doing subnetting or the switch is implementing VLAN. • The Memeo Autobackup program uses the same network port as the NDU to discover the NSA. To avoid a port conflict, do not run the Memeo Autobackup program at the same time as the NDU. • Close the NDU and reopen it. 14.3.2 Enabling Scripting of Safe ActiveX Controls If pages of the web configurator do not display properly in Internet Explorer, check that scripting of safe ActiveX controls is enabled. NSA-220 Plus User's Guide 285