ZyXEL NSA-220 Plus User Guide - Page 25
COPY/SYNC Button, 1.1.3 RESET Button, COPY/SYNC, RESET, Press, Beeps, IP Address, Password - default password
View all ZyXEL NSA-220 Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chapter 1 Getting to Know Your NSA 1.1.2 COPY/SYNC Button Use the COPY/SYNC button on the front panel to copy or synchronize files between a connected USB device and the NSA. See Section 7.8 on page 164 for more details on how to configure the copy/sync settings. 1.1.3 RESET Button Use the RESET button on the rear panel to restore the NSA's default settings. Figure 4 The RESET Button Press 1 Beep 2 Beeps 5 more seconds Release to Reset IP Address Password Release to Clear All Settings • Press the RESET button until you hear one beep (after about two seconds), then release it. You will hear one more beep after you release the button. This resets the NSA's IP address and password to the default values. • Press the RESET button until you hear two beeps. After the second beep, continue pressing the button for five more seconds, then release it. You will hear three quick beeps after you release the button. This resets the NSA to the factory default configuration. All settings you have configured on the NSA, including IP address, password, user accounts, groups, and so on will be reset to the factory defaults. The reset process does NOT affect the volume settings, nor data stored on the NSA. You should periodically back up your configuration file to your computer (see Section 12.5 on page 270 for details about managing the NSA's configuration file). You could then restore your configuration in the event that you or someone else reset the NSA to the factory defaults. Note: You should keep the NSA in a secure location in order to prevent unauthorized reset of the device. NSA-220 Plus User's Guide 25