Alpine INA-W900BT Owner's Manual (English) - Page 100

When Connecting External Equipment Rearview camera HCE-C107D, etc. (sold separately) To Audio Input terminal Rear monitor (sold separately) To Video Input terminal To Video Output terminal DVD Changer (sold separately) To Audio Output terminal (White/Pink) M.CONT * Connect this to the touch panel-compatible rear monitor. M.CONT (White/Pink) (White/Brown) REMOTE OUT (White/Brown) REMOTE IN REMOTE IN REMOTE OUT (White/Brown) (White/Brown) (Orange/White) REVERSE Use only when back-up camera is connected. System Switch When connecting an IMPRINT audio processor or divider using Ai-NET feature, place the two switches in the EQ/DIV position. When no device is connected, leave the switches in the NORM position. • Do not make the two switches to different settings. • Be sure to turn the power off to the unit before changing the switch position. AUX I/O Camera In Connector Video/Audio Output Connectors (AUX OUTPUT) Use when connecting an optional monitor etc. Video/Audio Input Connectors (AUX INPUT) Monitor Control Lead (White/Pink) Connect this to the Monitor Control Lead of the touch panelcompatible rear monitor. Remote Control Output Lead (White/Brown) Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control. Remote Control Input Lead (White/Brown) Reverse Lead (Orange/White) Use only when a back-up camera is connected. Connect to the plus side of the car's reverse lamp. This lamp illuminates when the transmission is shifted into reverse (R). With this lead properly wired, the video picture automatically switches to the back-up camera whenever the car is put into reverse (R). RCA Extension Cable (sold separately) Direct CAMERA Input Connector Use when the optional rearview camera HCE-C107D, etc. is connected. Camera extension cable (Included with Rear camera) 98-EN