Alpine INA-W900BT Owner's Manual (English) - Page 36
Viewing System Information, Radio, Listening to the Radio
UPC - 793276100276
View all Alpine INA-W900BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Locating GPS Satellites The INA-W900 searches the sky looking for GPS satellites. Acquiring GPS Signal The INA-W900 acquires positioning information transmitted from 1 to 3 tracked satellites while searching for more satellites (minimum 4 of needed). Fixing GPS Position The INA-W900 requires continuous signals from 4 or more tracked satellites (for 30 seconds) in order to accurately fix your position. Temporary Poor GPS Coverage Thunderstorms, dense foliage or surrounding tall buildings may cause temporary loss of position fix (acceptable if under 30 seconds). Poor GPS Signal, Lost Position Fix You may have entered an area where consistently poor GPS signal (lasting 30 seconds or more) makes it impossible to maintain a position fix. No Line of Sight, Lost GPS Tracking You are in an area where line of sight to GPS satellites has been blocked. Viewing System Information You can check software application, database version, and other information on this screen. Go to Main Menu Info System Radio Display example for FM Radio main screen [DX SEEK]* button: Displays the tuning mode selection list. Displays the preset number/frequency * The button displays the current tuning mode. This unit cannot receive HD Radio signals (digital terrestrial radio). In order to activate the digital radio functions described below, an optional HD Radio Tuner module must be connected through the AiNET bus. • Make a note of this information and refer to it whenever you communicate with customer support. Listening to the Radio 1 Press SOURCE/ on the unit. The SOURCE selection screen is displayed. Receiving Analog Radio signals: 2 Touch [Radio]. The radio mode is activated and the display changes to the Radio Mode screen. If the optional HD Radio Tuner module is connected, the digital radio mode is activated and the display changes to the HD Radio Tuner Mode screen. 3 Touch [BAND] to select the desired radio band. Each press changes the bands as follows: FM-1 FM-2 AM FM-1 4 Touch [DX SEEK]* to choose the tuning mode. DX SEEK Local SEEK MANUAL • There are two modes you can select for auto tuning, DX and Local: - DX (Distance) mode; Both strong and weak stations will be tuned in. - Local mode; Only strong stations will be tuned in. The initial setting is DX. 34-EN