Bosch WFMC5301UC Installation and Use & Care (all languages) - Page 13

Panel Buttons for additional options (in addition to the program if required) ECO e: Reduces the amount of energy used for the washing program. Rinse Plus: Additional rinsing cycle. Heavy duty: Increased wash time for heavily soiled loads. Additional options can be combined at any time. Additional option selected: Indicator light is lit red. Switch off additional option: Press button again. Indicator light turns off. Display The Ready in time is displayed, if a program is selected. The Start time is displayed, if this function is additionally selected. Program selector Switches the machine on and off and selects the program. Can be turned in both directions. The program selector does not turn while the program is running - the program sequence is electronically controlled. Start/Pause button Starts or interrupts the washing cycle (program must first be selected). Indicator light Indicator light flashes red: Settings can be changed, the wash cycle can be started, door is locked for reasons of safety or program is in Pause" mode. Indicator light is lit red: Program is running and "Pause" can be activated. The indicator light is off: Program is finished or no program selected. Indicator lights The door locked lights up if a program is selected and the Start button is pressed. The wash, rinse and spin lights up if the respective program segment runs. The finished lights up if the program has ended. Indicator lights flash: Operation error! Delay Start button The Start time can be delayed by hours up to a maximum of 19 hours (if required). The display shows the Delay Start time. Spin Selection button For changing the spin speed (if required). The indicator light of the selected spin speed is lit red. 13