Bosch WFMC5301UC Installation and Use & Care (all languages) - Page 20
During, Washing
UPC - 825225852117
View all Bosch WFMC5301UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
q If necessary, change the spin speed with the Spin selection button until the the desired spin speed indicator light is lit. q If necessary, change the Start time. Press the Delay Start button until the desired Start time is displayed. q Press the Start/Pause button. The indicator light is lit (red). Display shows the run time of the selected program. The program starts. i Each program step is indicated by the indicator lights under the display. 20 During Washing i Due to the highly engineered suspension of this appliance, it may experience a shudder or shake when progressing from lower to higher spin speeds. This behavior is normal due to shifting of the drum system and should not cause concern. Changing a program q Turn the program selector to Off. q Turn the program selector to a newly selected program. The Start/Pause indicator light flashes. q If required, change the settings; see from Page 18. q Press the Start/Pause button. The program starts. The indicator light is lit. Add a garment / Interrupting the program You can put laundry in the drum after washing begins, take laundry out of the drum early or interrupt the program at any time. i It is not recommended to add laundry after the washing phase is complete. i You can add or reduce laundry as long as the Start/Pause indicator light flashes (red). q Press the Start/Pause button. The Start/Pause indicator light flashes. q Open the door. q Place/remove the laundry. q Close the door. q Press the Start/Pause button. The program continues. The indicator light is lit (red). i When the Start/Pause indicator light is lit (red), the program can be interrupted, however the door cannot be opened for safety reasons (water level, temperature or speed too high). i If the spin speed is too high, the Start/Pause indicator light is lit (red). Laundry can be added in Pause" mode when the drum is at a standstill. Canceling an active program If you would like to terminate a program and remove the laundry: i If a program is interrupted at a high temperature, leave the laundry to cool down until the glass is cool to touch. q Turn the program selector to Off. q Turn the program selector to Refresh. i Select the desired spin speed (but not no final spin). q Press the Start/Pause button. q Wait until this program ends. q Open the door. q Unload the laundry. i If a program is interrupted at a high temperature, the door may remain locked until the appliance has cooled down. i If the program is terminated by switching off the appliance, the door may remain locked.