Brother International HL-720 Service Manual - Page 59
Main Motor Assy and Motor Heat Sink, Fig. 3.14, Gears and Solenoid, EM-30L TKC-0
View all Brother International HL-720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
3.13 Main Motor Assy and Motor Heat Sink (1) Remove the two screws securing the main motor assy. (2) Remove the two screws securing the motor heat sink. Fig. 3.14 3.14 Gears and Solenoid (1) Apply grease the point as shown below. Grease: MOLYKOTE EM-30L TKC-0 MOLYKOTE EM-D110 NOTE: Apply EM-30L to the small gears (2 pcs.) inside "Gear 45 arm assy". Fig. 3.15
3.13
Main Motor Assy and Motor Heat Sink
(1)
Remove the two screws securing the main motor assy.
(2)
Remove the two screws securing the motor heat sink.
Fig. 3.14
3.14
Gears and Solenoid
(1)
Apply grease the point as shown below.
Grease:
MOLYKOTE
EM-30L TKC-0
MOLYKOTE
EM-D110
NOTE:
Apply EM-30L to the small gears (2 pcs.) inside "Gear 45 arm assy".
Fig. 3.15