Canon imageCLASS D880 imageCLASS D880 Fax Guide - Page 13
Making Connections, Standby Display
View all Canon imageCLASS D880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Standby Display The standby display differs depending on which mode is selected. When the machine is plugged in, the Copy Mode standby display appears. You can switch from the Copy Mode to the Fax Mode by pressing FAX. The standby display in the Fax Mode is as follows: ■ Fax Mode Date & Time 1 Receive Mode Fax Resolution Introduction • The standby display in the Copy Mode → Basic Guide. NOTE Making Connections Connecting to the Telephone Line and an External Device The machine has two jacks on the left side for connection of the following: L : Telephone line : External device, such as a telephone or an answering machine 1 Connect the supplied telephone cable to the jack, then connect the other end of the cable to the telephone jack on your wall. 2 If you need to send and receive faxes and voice calls, connect the cable from the telephone or answering machine to the jack. 1-3