Canon imageCLASS D880 imageCLASS D880 Fax Guide - Page 75
Double Ring, Times, Auto Selection, Vertical Only - printer
View all Canon imageCLASS D880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Name 3.DRPD:SELECT FAX NORMAL RING DOUBLE RING SHORT-SHORT-LONG SHORT-LONG-SHORT OTHER RING TYPE 4.INCOMING RING OFF ON RING COUNT 5.MAN/AUTO SWITCH OFF ON 6.REMOTE RX ON REMOTE RX ID OFF PRINTER SETTINGS 1.RX REDUCTION ON 1.RX REDUCTION 2.SELECT REDUCE DIR OFF Description Selects a ring pattern when the machine receives faxes. (→ p. 5-5) The normal ring type of the telephone line. Two short rings at regular intervals. Short-short-long rings at regular intervals. Short-long-short rings at regular intervals. Patterns other than those described above. When the machine is set to FaxOnly and Fax/Tel, set whether the machine rings when it receives a call. The machine does not ring when it receives a fax. (In energy saver mode, the machine may ring one or two times.) The machine rings when it receives a fax if the handset or a telephone is connected. Sets the number of incoming rings before the machine answers. 9 1 to 99 TIMES (2 TIMES) Setting the Additional Functions Sets the machine to switch to the document receive mode after ringing for a specified length of time in the manual receive mode. The machine keeps ringing until someone answers the call manually with the handset or a connected extension telephone. F/T RING TIME: Sets the length of time that elapses before the machine switches to the document receive mode. 5 to 99 SEC (15 SEC) Receives from a remote telephone with preset setting. Remote receiving is turned on. You can dial a number code from the remote extension telephone to start receiving a document. A combination of two characters using 0 to 9, A, or # (25) is possible. Remote receiving is turned off. Sets the print functions. Receives images at a reduced size. Turns on image reduction. AUTO SELECTION: Automatically selects the reduction size. FIXED REDUCTION: Reduction size is preset. 97%, 95%, 90%, 75% VERTICAL ONLY: Reduction is performed in the vertical direction only. HORIZ & VERTICAL: Reduction is performed in the horizontal and vertical direction. Image reduction is turned off. (The factory default setting is in bold face.) 9-7