Canon imageCLASS D880 imageCLASS D880 Fax Guide - Page 74
Times, Error & 1st Receive
View all Canon imageCLASS D880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Name 3.AUTO REDIAL ON OFF 1.REDIAL TIMES 2.REDIAL INTERVAL 3.TX ERROR RESEND ON OFF 4.ERASE FAILED TX ON OFF 5.TIME OUT ON OFF RX SETTINGS 1.ECM RX ON OFF 2.FAX/TEL OPT.SET 1.RING START TIME 2.F/T RING TIME 3.F/T SWITCH ACTION RECEIVE DISCONNECT 9-6 Description Sets whether to perform automatic redialing when the other line is busy or no answer. Customizes the redial operation. After the first attempt at dialing fails, redialing is not attempted. Sets the number of retries. 1 to 10 TIMES (2 TIMES) Sets the period of time between redialings. 2 to 99 MIN. (2 MIN.) Redialing is attempted when a transmission error occurred. RESEND TX FROM: Sets the number of pages to be sent when redialing is attempted. ERROR & 1ST PAGE, ERROR PAGE, ALL PAGES Redialing is not attempted when a transmission error has occurred. Sets the ERASE FAILED TX function. The document is deleted from the memory if a transmission error has occurred. The document is not deleted from memory stored in the machine even if a transmission error has occurred. Enables/disables automatic scanning of documents after the fax number is entered using speed dialing. Scanning begins automatically in 5 or 10 seconds after you enter the phone number. Press Start to scan the document. Otherwise, the machine will return to the standby mode after two minutes while the AUTO CLEAR function activates. Sets the reception functions. ECM (error correction mode) receiving is turned on or off. All receptions are conducted with ECM if the other party's fax supports ECM. ECM is turned off. When FaxTel has been set, the optional settings are available. Sets the duration that the machine listens for a fax tone before ringing. 0 to 30 SEC (8 SEC) Sets the length of time the machine rings to alert you of an incoming call. 15 to 300 SEC (15 SEC) Selects the action taken after the F/T RING TIME expires. The machine switches to the fax receive mode automatically, and starts to receive the document. The machine disconnects the call. (The factory default setting is in bold face.)