Compaq Evo n610c Compaq Evo Notebook N410c Series and Evo Notebook N610c Serie - Page 23
Calibrating a Battery Pack, To exit Computer Setup, select File > Save Changes
View all Compaq Evo n610c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Power Calibrating a Battery Pack To calibrate a battery pack: 1. Connect the notebook to an AC electrical outlet. 2. Insert the battery pack into the notebook battery bay, MultiBay, or external battery bay. ✎ You cannot calibrate a battery pack in a Port Replicator or Mobile Expansion Unit. 3. To open Computer Setup, turn on or restart the notebook, then press F10 as soon as the F10 = ROM Based Setup message is displayed in the lower left of the screen. ❏ To change the language, press F2. ❏ To view navigation information, press F1. 4. Select the Tools menu. 5. Select Battery Calibration. The calibration status of all battery packs in the system is displayed. 6. Select a battery pack that the utility reports needs calibration, then press enter. ✎ The progress of calibration is presented on the screen as a percentage of completed charging, discharging, and recharging. 7. When the utility reports that calibration is complete, either calibrate another battery pack or exit Computer Setup. ❏ To calibrate another battery pack, repeat the steps above. ❏ To exit Computer Setup, select File > Save Changes and Exit, then follow the instructions on the screen. Software Guide 1-17