Compaq Evo n610c Compaq Evo Notebook N410c Series and Evo Notebook N610c Serie - Page 55
Enabling Devices in Computer Setup - usb boot
View all Compaq Evo n610c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
MultiBoot (Advanced Users Only) Sequence for devices that boot as drive C: 1. Optical drive in a Port Replicator MultiBay or connected by USB that contains a disc that boots as drive C. 2. Optical drive in the notebook or MEU MultiBay that contains a disc that boots as drive C. 3. Hard drive in the notebook hard drive bay. 4. Hard drive in the notebook or MEU MultiBay. 5. Hard drive in a Port Replicator MultiBay or connected by USB. 6. NIC. ✎ Since no drive letter is associated with the NIC, changing the boot order of a NIC does not affect drive letters of the other devices. Enabling Devices in Computer Setup The notebook can only start up from a USB device or the NIC (network interface card) if it has been enabled for inclusion in MultiBoot. To enable a device or location for inclusion in MultiBoot: 1. To open Computer Setup, turn on or restart the notebook, then press F10 while the F10 = ROM Based Setup message is displayed in the lower left of the screen. ❏ To change the language, press F2. ❏ For navigation instructions, press F1. Software Guide 5-3