Dell B1265dfw Dell Users Guide - Page 156

Wireless network setup Canceling the connection process To cancel the wireless network connection when the machine is connecting to the wireless network, press and release the (power/cancel) button on the control panel. You need to wait 2 minutes to re-connect to the wireless network. Disconnecting from a network To disconnect the wireless network connection, press the the control panel for more than two seconds. (WPS) button on • When the Wi-Fi network is in idle mode: The machine is immediately disconnected from the wireless network and the WPS LED turns off. • When the Wi-Fi network is being used: While the machine waits until the current job is finished, the light blinks fast on the WPS LED. Then, the wireless network connection is automatically disconnected and the WPS LED turns off. 18 Setup using Windows Dell Printer Easy Wi-Fi Install Before Using Dell Printer Easy Wi-Fi Install, please ensure that OS of your computer should be Windows 7 and above. • Items to prepare - Access point - Wireless network-connected computer - Software CD that was provided with your machine 1 Turn on your computer, access point and machine. 2 Connect your computer to the wireless network. 3 Insert the supplied software CD into your CD/DVD drive. The software CD should automatically run and an installation window will appear. If the installation window does not appear, click Start > All programs > Accessories > Run. X:\Setup.exe replacing "X" with the letter, which represents your CD/ DVD drive and click OK. 2. Using a Network-Connected Machine 156