Dell B1265dfw Dell Users Guide - Page 164
Confirm Wireless Network Settings, Install Printer Driver, Change TCP/IP
View all Dell B1265dfw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Wireless network setup 9 The Confirm Wireless Network Settings window appears. Click the settings and click Next. If you want to change TCP/IP settings, click Change TCP/IP Before entering the IP address for the machine, you must know the computer's network configuration information. If the computer's network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer's network configuration is set to Static, the wireless network setting should also be Static. If your computer is set to DHCP and you want to use the Static wireless network setting, you must contact the network administrator to get the static IP address. • Receive IP address automatically (DHCP) If the IP address assignment method is DHCP, check if DHCP is shown in the Confirm Wireless Network Settings window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). • Use static address If the IP address assignment method is Static, check if Static is shown in the Confirm Wireless Network Settings window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. For example: If the computer's network information is as shown follows: - IP address: 169.254.133.42 - Subnet Mask: 255.255.0.0 Then, the machine's network information should be as below: - IP address: 169.254.133.43 - Subnet Mask: 255.255.0.0 (Use the computer's subnet mask.) - Gateway: 169.254.133.1 10 When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click Next. 11 Click Next when the Install Printer Driver window appears. 12 Select the components to be installed. Click Next. 13 After selecting the components, you can also change the machine name, set the machine to be shared on the network, set the machine as the default machine, and change the port name of each machine. Click Next. 2. Using a Network-Connected Machine 164