Dell B1265dfw Dell Users Guide - Page 45

Media and tray 6 Setting the paper size and type 7 Preparing originals After loading paper in the paper tray, set the paper size and type using the control panel buttons. It may be necessary to press OK to navigate to lower-level menus for some models. 1 Select (Menu) > System Setup > Paper Setup > Paper Size or Paper Type on the control panel. 2 Select the tray and the option you want. 3 Press OK to save the selection. • The settings set from the machine driver override the settings on the control panel. a To print from an application, open an application and start the print menu. b Open Printing Preferences (see "Opening printing preferences" on page 51). c Press the Paper tab and select an appropriate paper. • If you want to use special-sized paper such as billing paper, select the Paper tab > Size > Edit... and set Custom Paper Size Settings in the Printing Preferences (see "Opening printing preferences" on page 51). • Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or larger than 216 x 356 mm (8.5 x 14 inches). • Do not attempt to load the following s of paper, in order to prevent paper jam, low print quality and machine damage. - Carbon-paper or carbon-backed paper - Coated paper - Onion skin or thin paper - Wrinkled or creased paper - Curled or rolled paper - Torn paper • Remove all staples and paper clips before loading. • Make sure any glue, ink, or correction fluid on the paper is completely dry before loading. • Do not load originals that include different sizes or weights of paper. • Do not load booklets, pamphlets, transparencies, or documents with other unusual characteristics. 2. Menu overview and basic setup 45