Dell PowerVault 130T DLT Service Manual - Page 39
Removing the Front Door
View all Dell PowerVault 130T DLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
PowerVault 130T Service Manual Removing the Front Door Removing the Front Door You will need to open the library front door to service the robotics and the arrays. The tape drives and the electronics module are serviced from the rear of the library. Figure 3-2. Removing the Library Front Door To open and remove the front door: 1. Place the library offline. 2. Unlock the front door with the key provided. 3. Remove the door by pulling out the two hinge pins and lifting the door up and away from the library. Set the door off to the side and out of the way. Be careful not to break the key off in the lock. To replace and close the front door: 1. Align the door with the hinges. 2. Install the two hinge pins. 3. Close the library front door. The safety interlock engages when you close the door. 4473D 3-3