Dell PowerVault 130T DLT Service Manual - Page 82
Table, Reliability, Physical, Specifications, Environmental Specifications, Measurement, Operating
View all Dell PowerVault 130T DLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Specifications PowerVault 130T Service Manual Table A-2. Reliability Item Mean exchanges between failures (MEBF) Mean time to repair (MTTR) Measurement 1,000,000 less than 30 minutes Table A-3. Physical Specifications Item Width Height Depth Rear clearance, library to any wall or other cabinet Front clearance, library to any wall or other cabinet Minimum rear clearance required to remove/replace electronics module or tape drives Weight with no drives Weight with 4 drives Measurement 48.3 cm (19 in.) 44.5 cm (17.5 in.) 72.6 cm (28.6 in.) 20.5 cm (8 in.) 50.8 cm (20 in.) 61 cm (24 in.) 50 kg (110 lb) 68 kg (149 lb) Table A-4. Power Specifications Item Measurement Input Voltage 90-264 VAC, single phase Frequency 47-63 Hz Maximum power consumption (library) 1.0 A at 120 V or 0.5 A at 240 V Maximum power consumption (each DLT4000 drive) 0.8 A at 120 V or 0.42 A at 240 V Maximum power consumption (each DLT7000 drive) 0.92 A at 120 V or 0.46 A at 240 V Table A-5. Environmental Specifications Item Measurement Operating Storage Transit Temperature +15 to +32 C +10 to +40 C -40 to +60 C +59 to +90 F +50 to +104 F -40 to +140 F Humidity 20 to 80% 10 to 95% 10 to 95% Wet bulb (max, non-condensing) +29.2 C +84.5 F +35 C +95 F +35 C +95 F Altitude -76 to 3,048 m (-250 to 10,000 ft) A-2 4473D