Dell PowerVault 130T DLT Service Manual - Page 76
Slide the motor to the bottom of the cutout, damage the Z motor cables.
View all Dell PowerVault 130T DLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Z Motor 7. Remove the four screws holding the Z motor to the Z motor bracket using a Torx driver with a T-15 bit. Remove the top screw last. 8. Remove the top screw, holding the Z motor from behind, being careful not to damage the Z motor cables. 9. Slide the motor to the bottom of the cutout and lift the belt from the motor shaft while holding the Z motor from behind. 10. Remove the motor by pushing the shaft through the cutout in the Z motor bracket. PowerVault 130T Service Manual 3-40 4473D
Z Motor
PowerVault 130T Service Manual
3–40
4473D
7.
Remove the four screws holding the Z
motor to the Z motor bracket using a Torx
driver with a T-15 bit.
Remove the top
screw last.
8.
Remove the top screw, holding the Z
motor from behind, being careful not to
damage the Z motor cables.
9.
Slide the motor to the bottom of the cutout
and lift the belt from the motor shaft while
holding the Z motor from behind.
10. Remove the motor by pushing the shaft
through the cutout in the Z motor bracket.