Epson PowerLite 715c User Manual - Page 102

Solving Problems, Status lights, Refer to the following table for a complete description of

Get Epson PowerLite 715c PDF manuals and user guides View all Epson PowerLite 715c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 102 highlights

Refer to the following table for a complete description of the projector's status lights and their meaning: Status lights Light Status orange flashing green Description The projector is in sleep mode. You can unplug it or press the Power button to turn it on. The projector is warming up. Wait for the image to appear. green The projector is operating normally. flashing orange flashing red red The projector is cooling down. You can't turn it back on (and you should not unplug it) until the light stops flashing and remains orange. Power is cut off because of an internal problem. Remove the power cord and contact EPSON for help. The lamp is burned out. Replace it as described on page 86. flashing orange flashing red flashing orange red flashing red The lamp is almost burned out. This is a good time to replace it. See page 86 for instructions. There is a problem with the lamp. If necessary, replace the lamp as described on page 86. The projector is in a high-temperature cooling cycle. Make sure the temperature surrounding the projector does not exceed 104 °F and there is plenty of space around and under the projector for ventilation. Clean the air filter if necessary. See page 85 for instructions. The projector has overheated and turned itself off. Let it cool for a few minutes, then turn it back on. Make sure there is plenty of space around and under the projector for ventilation. If it continues to overheat, you may need to change the air filter. See page 85 for instructions. There is a problem with the cooling fan or temperature sensor. Turn off the projector and unplug it. Contact EPSON for help. Solving Problems 93

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
Solving Problems
93
Refer to the following table for a complete description of the
projector
’
s status lights and their meaning:
Status lights
Light
Status
Description
orange
The projector is in sleep mode. You can unplug it or press the
Power
button to turn it on.
flashing green
The projector is warming up. Wait for the image to appear.
green
The projector is operating normally.
flashing orange
The projector is cooling down. You can
’
t turn it back on (and you
should not unplug it) until the light stops flashing and remains orange.
flashing red
Power is cut off because of an internal problem. Remove the power
cord and contact EPSON for help.
red
The lamp is burned out. Replace it as described on page 86.
flashing orange
The lamp is almost burned out. This is a good time to replace it. See
page 86 for instructions.
flashing red
There is a problem with the lamp. If necessary, replace the lamp as
described on page 86.
flashing orange
The projector is in a high-temperature cooling cycle. Make sure the
temperature surrounding the projector does not exceed 104
°
F and
there is plenty of space around and under the projector for ventilation.
Clean the air filter if necessary. See page 85 for instructions.
red
The projector has overheated and turned itself off. Let it cool for a few
minutes, then turn it back on. Make sure there is plenty of space
around and under the projector for ventilation. If it continues to
overheat, you may need to change the air filter. See page 85 for
instructions.
flashing red
There is a problem with the cooling fan or temperature sensor. Turn
off the projector and unplug it. Contact EPSON for help.